PE-Connector, 2x 2.54cm (1'') external thread

To bridge between two 2.54cm ( 1'') inside threads.

Pump connection, 90°, 2x 2.54cm (1'') inside threads

To lead from 2.54cm (1 inch) external thread to another 2.54cm (1 inch) external thread and deflect 90°.

Water filter 1.9cm (3/4"), 100 mesh, without hose connections

A water filter to improve the quality of the water in the irrigation system.

End Ø 20mm for thyleen hose

When there is no water loop you need this end to seal the supply hose. Suitable for 20mm systems.

Stop valve for thyleen-hose, Ø 20mm

Fitting stop valve for a 16mm system. Very stable and easy to clean.

Connection for irrigation hose 20mm Ø, 1.9cm inside thread

Connection for irrigation hose 20mm Ø, 1.9cm (3/4") inside thread

Connection for irrigation hose 20mm Ø, 1.9cm outside thread

Connection for irrigation hose 20mm Ø, 1.9cm (3/4") outside thread

Reducing spout 2.54cm (1") inside thread to 1.9cm inside thread

Reducing spout 2.54cm (1") inside thread to 1.9cm (3/4") inside thread.

Reducing spout 2.54cm (1") outside thread to 1.9cm outside threa

Reducing spout 2.54 cm (1") outside thread to 1.9cm (3/4") outside thread.

Reducing spout 2.54cm (1") outside thread to 1.9cm inside thread

Reducing spout 2.54cm (1") outside thread to 1.9cm (3/4") inside thread.

connector, male screw thread, 2x 1.9cm (2 x 3/4'')

Connector, male screw thread, 2 x 1.9cm (2 x 3/4'')

Tank connector with 2.54cm (1“) thread

The tank connector connects a hose connector to the water tank

branch, tee for Ø 20 mm

Tee to divert the hose within an irrigation-system

angle, for Ø 20 mm

The angle allows to change direction of the hose.

Drain-Kit, threepart set for flood table inlays and 20er hose

Threepart drain-kit for the irrigation of flood tables

Pump connection bend, 90°, 3.17cm (1.25 inch) to 2.54cm (1 inch)

To connect e.g. a check valve to a water pump. To lead from 3.17cm (1.25 inch) thread to a 2.54cm (1 inch) thread.

Pump connection bend, 90°, 3.81cm (1.5 inch) to 2.54cm (1 inch)

To connect e.g. a check valve to a water pump. To lead from 3.81cm (1.5 inch) thread to a 2.54cm (1 inch) thread.

Check valve 1.9cm (3/4''), internal thread

This check valve can be screwed on water filters and connected to by the "gardena-click" or a water filter connection to a 16er-hose.

Check valve 2.54cm(1''), internal thread

For screwing on 20er-hose and to connect the water filter, this check valve can be used.

Gardena quick coupling hose connector, Ø 25mm

Robust hose connector to connect a hose to a quick coupling. Ø 25mm (1") and ca. 50mm length

Gardena quick thread coupling with female thread, Ø 33.3mm

Quick thread coupling with female thread to connect an apparat (male thread) to an adapter. Ø 33.3mm ( G 1) and ca. 2.5cm length.

Gardena quick thread coupling with male thread, Ø 33.3mm

Quick thread coupling with male thread to connect an apparat (female thread) to an adapter. Ø 33.3mm ( G 1) and ca. 2.3mm length.
 

2 GreenTech complett-connectors in a package

Two hose connectors for the GreenTech hose system with press-lock

GreenTech connector for press-lock, with thread adapter

Male and female part of the GreenTech hose system press-lock to connect a hose to a water pump or a water tap.

GreenTech connector for the press-lock with thread-adapter

This is a thread-adapter for a water tap or a pump to a hose onto a press-lock, with an adapter from 1.28cm (1/2'') outside- onto 1.9cm (3/4'') inside-thread.

GreenTech connector for the press-lock with 1.9cm (3/4'' thread)

This is the male connecting piece onto a press-lock of your garden hose.

Quick connector for 1.27cm (1/2") water hose

This is a quick connector to just "click" together. It's not only compatible with GreenTech, but also for all standard systems with standadrdized sizes.

Tap adapter for 2.54cm (1") thread

This tap adapter belongs to the quick connector. It's the conterpart that has to be attached to the tap (or pump e.g.). Then you just click the hose onto the adapter.

Watering rod, ca. 80cm long

The watering rod for incomplex watering, ca. 80cm long.

Garden hose, 1.27cm (1/2 inch), running meter

Practical garden hose in yard goods, 1.27cm (1/2 inch).

punching press 2,5mm

To inaugurate your capillary hoses in the water hose, you can use this punching press.

Ata Clean, 1 liter

Avoids and removes calcification, Iron phosphate deposits and alga formation. 100% harmless for plants. Especially for the use with tap water.

Ata Clean, 0,25 litre

Cleaner for irrigation systems. Avoids and removes calcification, iron phosphate deposits and alga formation.

pro-punching press 2,5mm universal

Can be used with irrigtaing hoses from 16mm to 32mm.

Connection for ebb &flood tables, 2.54cm (1'') supply + spill

2.54cm (1'') suppy and spill with rubber seal and stop-cock. Used to control the water supply for flood table inlays. Two-piece.

PE-Prefilter, 2.54cm (1 inch) thread, 3.5cm high

The prefilter holds back pieces of plants and dirt.

Drain-filter for flood table inlays, 11.5 x 22.5 cm

Square drain-filter with 3 pre-cut holes.

Neopren net-pot covering, round, Ø ca. 5cm

As brilliant as it is simple: Protection against algae accumulation.